500 ml pot Soft cylinder PP white

500 ml pot Soft cylinder PP white is a round pot which, thanks to the sturdy PP material, is user-friendly and attractive. Due to the white colour, the pot is opaque and has a fresh and protective appearance.

Closures:

The pot has a 99mm closure, for this neck we have perfectly fitting closures which have been used for several years as combination.

• Screw cap

These are in stock in our warehouse in Groningen (Netherlands).

Material:

PP or Polypropylene PP is a sturdy and fairly hard plastic. PP has a good water and oxygen barrier but is less resistant to breakage and impact, especially at low temperatures. PP is widely used for pots and closures.

Maximum Temperature:

PP is suitable for up to 90 degrees. Prolonged exposure to these temperatures can still damage or deform the pots. PP is recyclable and can therefore be reused to make new packaging.

Food Safety:

The pot is food safe and an excellent choice for companies and individuals looking for reliable packaging. Suitable for filling foodstuffs, beverages, cosmetics, cleaning agents, pharmaceutical and chemical products. All raw materials we use, except for recycled HDPE products, are approved raw materials according to various European and American regulations that may come into contact with food products.

Shape:

Round, we call a pot round when the base of the pot forms a perfect circle, the indicated diameter is measured on the outside of the pot at the widest point. Our round pots can have different shoulders, by shoulders we mean the part where the pot narrows at the top to gradually transition into the neck section. The most common variants are a rounded or sharp shoulder. Rounded means there is a radius on the pot and the side flows smoothly into a sloping top which connects to the neck section. The sharp shoulder is a hard angle after which the pot slopes sharply to the neck. Lastly, on the Bullet round we also have a conical shoulder, this shoulder starts halfway up the pot and gradually tapers into a pointed shape towards the neck without a clear edge.

Service & Delivery:

From our own warehouse in Zuidbroek, Netherlands, we offer a carefully selected range of pots and jars, with many choices in closures, materials and colours. All this can be combinered so that it perfectly fits your brand and product.

The majority of our products:

• Are produced in the Netherlands, Germany or Europe
• Are produced from our own moulds
• Are in stock in our own warehouse
• Are usually shipped by the next working day at the latest